Product Description

Hydraulic Actuator -Hydraulic Telescopic Cylinder for Truck

1. Company Information
  Found 1995,w are 1 of the biggest hydraulic cylinder manufacturer in China, specialized in design, R & D and manufacturing of hydraulic machinery products etc, with its annual production capaciy of 2 square meters.There are 700 sets of mnufacturing equipment .

Product Description
  2. hydraulic telescopic cylinder for dump truck drawing and parameter 

FC type

ITEM  MODEL NO. # of Stages Largest Moving Stage Diameter(mm) stroke(mm) the largest sleeve OD(mm) mounting distance(mm) 
1  WTHY FC-3-110-3205 3 110 3205 168 343
2   WTHY FC-3-110-3460 3 110 3460 168 343
3  WTHY FC-3-129-2980 3 129 2980 218 343
4  WTHY FC-3-129-3205 3 129 3205 218 343
5  WTHY FC-3-129-3460 3 129 3460 218 343
6  WTHY FC-3-129-3880 3 129 3880 218 343
7   WTHY FC-3-129-4270 3 129 4270 218 343
8   WTHY FC-4-129-4280 4 129 4280 218 343
9   WTHY FC-4-129-4280 4 129 4280 218 343
10   WTHY FC-4-129-5180 4 129 5180 218 343
11   WTHY FC-3-149-4270 3 149 4270 244 343
12   WTHY FC-4-149-3680 4 149 3680 218 343
13   WTHY FC-4-149-3980 4 149 3980 218 343
14   WTHY FC-4-149-4280 4 149 4280 244 343
15   WTHY FC-4-149-4620 4 149 4620 244 343
16   WTHY FC-4-149-4940 4 149 4940 244 343
17  WTHY FC-4-149-5180 4 149 5180 244 343
18   WTHY FC-4-149-5460 4 149 5460 244 343
19   WTHY FC-4-169-4280 4 169 4280 244 343
20   WTHY FC-4-169-4620 4 169 4620 244 343
21   WTHY FC-4-169-4940 4 169 4940 244 343
22   WTHY FC-4-169-5180 4 169 5180 244 343
23  WTHY FC-4-169-5460 4 169 5460 244 343
24  WTHY FC-5-169-5355 5 169 5355 244 343
25  WTHY FC-5-169-5780 5 169 5780 244 343
26  WTHY FC-5-169-6180 5 169 6180 244 343
27  WTHY FC-5-169-6830 5 169 6830 244 343
28  WTHY FC-5-169-7130 5 169 7130 244 343
29  WTHY FC-5-169-7630 5 169 7630 244 343
30  WTHY FC-5-169-8130 5 169 8130 244 343
31  WTHY FC-5-169-9030 5 169 9030 244 343
32  WTHY FC-5-169-9530 5 169 9530 244 343
33  WTHY FC-4-191-5460 4 191 5460 274 343
34  WTHY FC-5-191-5780 5 191 5780 274 343
35  WTHY FC-5-191-6180 5 191 6180 274 343
36  WTHY FC-5-191-7130 5 191 7130 274 343
37  WTHY FC-5-191-7630 5 191 7630 274 343
38  WTHY FC-5-191-8130 5 191 8130 274 343
39  WTHY FC-5-191-9030 5 191 9030 274 343
40  WTHY FC-5-191-9530 5 191 9530 274 343
41  WTHY FC-5-214-7610 5 214 7610 274 343
42  WTHY FC-5-214-9030 5 214 9030 274 343

FE type

ITEM MODLE NO. # of Stages Largest Moving Stage Diameter(mm) stroke(mm) mounting distance(mm) 
1 WTHY FE-3-110-3205 3 110 3205 1449
2 WTHY FE-3-110-3460 3 110 3460 1609
3 WTHY FE-3-129-3460 3 129 3460 1449
4 WTHY FE-3-129-3880 3 129 3880 1609
5 WTHY FE-3-149-2900 3 149 2900 1320
6 WTHY FE-3-149-3200 3 149 3200 1420
7 WTHY FE-3-149-3500 3 149 3500 1520
8 WTHY FE-3-149-3880 3 149 3880 1644
9 WTHY FE-4-149-4280 4 149 4280 1450
10 WTHY FE-4-149-4940 4 149 4940 1529
11 WTHY FE-4-149-4620 4 149 4620 1484
12 WTHY FE-4-169-4280 4 169 4280 1394
13 WTHY FE-4-169-4450 4 169 4450 1437
14 WTHY FE-4-169-4620 4 169 4620 1479
15 WTHY FE-4-169-4940 4 169 4940 1529
16 WTHY FE-4-169-5000 4 169 5000 1574
17 WTHY FE-4-169-5180 4 169 5180 1604
18 WTHY FE-5-169-5355 5 169 5355 1394
19 WTHY FE-5-169-5780 5 169 5780 1559
20 WTHY FE-5-169-6180 5 169 6180 1527
21 WTHY FE-5-169-6480 5 169 6480 1604
22 WTHY FE-5-169-6830 5 169 6830 1674
23 WTHY FE-5-169-7130 5 169 7130 1769
24 WTHY FE-5-191-6180 5 191 6180 1527
25 WTHY FE-5-191-9030 5 191 9030 2177
26 WTHY FE-6-191-7420 6 191 7420 1677
27 WTHY FE-5-214-6830 5 214 6830 1662
28 WTHY FE-5-214-7130 5 214 7130 1722

3. hydraulic telescopic cylinder for dump truck produce line
700 sets manufacturing equipment,such as cold drawing production line ,heat treatment production line ,surface treatment production line,testing equipment,various digital-control machining equipment,gantry style linear electroplating production line.

4. hydraulic telescopic cylinder for dump truck quality guarantee system
Program before Delivery
1). Trial Operation Test
2). Start-up Pressure Test
3). Pressure-Tight Test
4). Leak Test
5). Full Stroke Test
6). Buffer Test
7). Testing the Effect of Limit
8). Load Efficiency Test
9). Reliability Test
Every piece of hydraulic cylinder are tested and will send out only after they are pasted the each test.
  Our company has abundant technical force and perfect testing means. By making wide technical and business cooperation with many related enterprises, universities, colleges and institutes both at home and abroad, and employing senior engineers and software engineers, we have greatly strengthened and improved our designing, processing, and testing abilities.

5. After-service
    1).Pre-sale service: Keep communicating with the truck manufacturers , including selection of product model , design of hydraulic system,   test of performance and analysis of the accident. Once the problems occur, we will solve them immediately together with truck manufacturers .
    2).The sale service: Provide training and technical support for users.
    3).After-sale service: Solve the problem firstly, then analyse responsibility ; Replace the system components immediately if any need. 
    4). 24 hours telephone service hotline.

6.Exhibition and partner

7. FAQ

Q1:What's the brand name of your products ?
A:Generally,we use our own brand "WTJX",OEM is also available as required.
Q2:Hydraulic cylinder internal leakage?
A: There are 3 main reasons causing internal leakage :Overload,polishing is not well controlled,bad seal kits.As is known to all,vehicles in China are often overload,our products all designed to  bear the overload power.We have numerical control machine  to assure the polish processing .And we use the imported seals to meet customers' demands.
Q3:Does your piston rod get ruptured easily?
A: Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness.
Q4:Is your design reasonable? What about your product safe coefficient?
A:We have R&D team with abundant design experience. We also established production, education, and research cooperation with universities . Rest assured.
Q5:What about the quality feedback of your products?
A: Guarantee the quality from the raw material. We have cold drawing production line and nickel-chrome electroplating production line , so we can produce cold-drawing pipe and hard-chrome pipe used for hydraulic cylinder. !!!
WE HAVE NEVER RECEIVED EVEN ONCE QUALITY COMPLAINT FOR MANY YEARS OF INTERNATIONAL TRADE.
Q6:Is the sample free?
A:Yes.In our acceptable range, we can offer a sample by charging freight. And we will return the fee after you place bulk order.
Q7:How about the delivery time?
A: Over 700 sets advanced equipments to meet customer's large demand in short delivery time.Generally ,it's 20 days.
Q8:What 's the after-service?
A:If the quality can't meet your requirement ,we will pay all your lost and offer technical support to solve your problem!!!
 

Material: Steel
Usage: Truck
Structure: General Cylinder
Power: Hydraulic
Standard: Standard, Nonstandard
Rated Pressure: 20
Customization:
Available

|

hydraulic cylinder

What role do hydraulic cylinders play in optimizing power distribution and efficiency?

Hydraulic cylinders play a significant role in optimizing power distribution and efficiency in various applications. They are widely used in industries such as construction, manufacturing, agriculture, and transportation, where efficient power transmission and precise control are essential. Here's a detailed explanation of the role hydraulic cylinders play in optimizing power distribution and efficiency:

1. Power Transmission:

- Hydraulic cylinders serve as a means of power transmission in hydraulic systems. They convert the hydraulic fluid's pressure and flow into linear mechanical force, allowing for controlled movement of loads. Hydraulic cylinders efficiently transmit power from an energy source, such as a hydraulic pump, to the working components of the system. The ability to transmit power over long distances with minimal energy losses makes hydraulic cylinders an efficient choice for various applications.

2. High Power Density:

- Hydraulic cylinders offer high power density, meaning they can generate significant force relative to their size. This characteristic enables compact and lightweight hydraulic systems while delivering substantial power output. Hydraulic cylinders can produce high forces even at low operating speeds, making them suitable for heavy-duty applications. The high power density of hydraulic cylinders contributes to the optimization of power distribution by maximizing the force output while minimizing the system's overall size and weight.

3. Load Handling and Control:

- Hydraulic cylinders provide precise load handling and control capabilities, contributing to power distribution optimization. By adjusting the flow of hydraulic fluid to the cylinder, operators can control the speed, force, and direction of the cylinder's movement. This level of control allows for accurate positioning and smooth operation of loads, reducing energy waste and improving overall system efficiency. Hydraulic cylinders enable precise load handling and control, leading to optimal power distribution and improved energy efficiency.

4. Variable Force and Speed:

- Hydraulic cylinders offer the advantage of variable force and speed control. By regulating the flow of hydraulic fluid, the force exerted by the cylinder can be adjusted as needed. This flexibility enables hydraulic systems to adapt to different load requirements, optimizing power distribution. Hydraulic cylinders can operate at varying speeds, allowing for efficient power distribution across different stages of an operation. The ability to vary force and speed according to the application's demands enhances energy efficiency and overall system performance.

5. Energy Recovery:

- Hydraulic cylinders can contribute to energy efficiency through energy recovery mechanisms. In certain applications, hydraulic systems utilize accumulators to store and release energy. Hydraulic cylinders can store energy during deceleration or when the load is lowering, and then release it to assist in subsequent movements. This energy recovery process reduces the overall energy consumption of the system, optimizing power distribution and improving efficiency. The ability to recover and reuse energy enhances the sustainability and cost-effectiveness of hydraulic systems.

6. Integrated Control Systems:

- Hydraulic cylinders can be integrated into advanced control systems, such as servo control or proportional control systems. These systems utilize electronic feedback, sensors, and control algorithms to optimize power distribution and efficiency. By continuously monitoring and adjusting the flow of hydraulic fluid, the control systems ensure that the cylinder operates at the most efficient operating point, minimizing energy losses and maximizing power distribution. Integrated control systems enhance the overall energy efficiency of hydraulic systems and contribute to power optimization.

7. System Efficiency Improvement:

- Hydraulic cylinders, when combined with other components in a hydraulic system, contribute to overall system efficiency improvement. The integration of efficient hydraulic pumps, valves, and actuators helps minimize energy losses, pressure drops, and heat generation. By optimizing the design and configuration of the hydraulic system, including the selection of appropriate cylinder sizes, operating pressures, and control strategies, power distribution can be optimized, leading to improved energy efficiency. Proper system design and component selection are critical for achieving optimal power distribution and efficiency.

In summary, hydraulic cylinders play a crucial role in optimizing power distribution and efficiency in various applications. They enable efficient power transmission, offer high power density, provide precise load handling and control, allow for variable force and speed control, facilitate energy recovery, can be integrated into advanced control systems, and contribute to overall system efficiency improvement. By leveraging the capabilities of hydraulic cylinders, industries can achieve better power utilization, reduced energy consumption, and improved system performance.

hydraulic cylinder

What considerations are important when selecting hydraulic cylinders for mobile equipment?

To select hydraulic cylinders for mobile equipment, several important considerations need to be taken into account. Here are the key factors to consider:

  1. Load Capacity: Determine the maximum load or force that the hydraulic cylinder will need to support. This includes both the static load and any dynamic or shock loads that may be encountered during operation.
  2. Stroke Length: Consider the required stroke length, which is the distance the hydraulic cylinder can extend and retract. Ensure that the stroke length is sufficient for the specific application and range of motion needed.
  3. Operating Pressure: Determine the maximum operating pressure required for the hydraulic system. This will depend on the load and the specific application. Select a hydraulic cylinder with a pressure rating that exceeds the maximum operating pressure to ensure safety and durability.
  4. Mounting Style: Consider the available space and the mounting requirements of the mobile equipment. Hydraulic cylinders come in various mounting styles, such as flange, trunnion, clevis, and pivot, among others. Choose a mounting style that is compatible with the equipment and provides the necessary support and stability.
  5. Size and Weight: Take into account the physical dimensions and weight of the hydraulic cylinder. Ensure that it can fit within the available space and that the equipment can support its weight without compromising performance or safety.
  6. Speed and Precision: Evaluate the required speed and precision of the hydraulic cylinder's movement. Different cylinder designs and configurations can affect the speed and accuracy of motion. Consider factors such as cylinder bore size, rod diameter, and the presence of cushioning or dampening features.
  7. Environmental Factors: Assess the operating environment of the mobile equipment. Consider factors such as temperature extremes, exposure to moisture, dust, and chemicals. Select hydraulic cylinders with appropriate seals and coatings that can withstand the environmental conditions and prevent corrosion or damage.
  8. Reliability and Maintenance: Consider the reliability and maintenance requirements of the hydraulic cylinders. Look for reputable manufacturers that provide high-quality products with a proven track record. Evaluate factors such as expected service life, availability of spare parts, and ease of maintenance.
  9. Cost: Finally, consider the cost of the hydraulic cylinders, including the initial purchase price, installation costs, and long-term maintenance expenses. While it is essential to find a cost-effective solution, prioritize quality and performance to ensure safe and efficient operation.

hydraulic cylinder

How do manufacturers ensure the quality and compatibility of hydraulic cylinders?

Manufacturers employ various measures to ensure the quality and compatibility of hydraulic cylinders, ensuring that they meet industry standards, performance requirements, and the specific needs of their customers. Here's a detailed explanation of the methods and practices used by manufacturers to ensure the quality and compatibility of hydraulic cylinders:

1. Design and Engineering:

- Manufacturers employ skilled engineers and designers who have expertise in hydraulic systems and cylinder design. They use advanced design software and tools to create hydraulic cylinders that meet the desired specifications and performance requirements. Through careful analysis and simulation, manufacturers can ensure that the cylinders are designed to function optimally and provide the necessary force, stroke length, and reliability.

2. Material Selection:

- High-quality materials are crucial for the durability, performance, and compatibility of hydraulic cylinders. Manufacturers carefully select materials such as steel or other alloys based on their strength, corrosion resistance, and suitability for hydraulic applications. They source materials from reputable suppliers and perform quality checks to ensure that the materials meet the required standards and specifications.

3. Quality Control:

- Manufacturers implement robust quality control processes throughout the production of hydraulic cylinders. This includes rigorous inspections and tests at various stages of manufacturing, from raw material inspection to final assembly. Quality control personnel perform dimensional checks, surface finish inspections, and functional tests to verify that the cylinders meet the specified tolerances, performance criteria, and compatibility requirements.

4. Testing and Validation:

- Hydraulic cylinders undergo testing and validation procedures to ensure their performance, reliability, and compatibility. Manufacturers conduct various tests, such as pressure testing, leakage testing, load testing, and endurance testing. These tests simulate real-world operating conditions and verify that the cylinders can withstand the expected loads, pressures, and environmental factors. Additionally, manufacturers may perform compatibility testing to ensure that the cylinders can integrate seamlessly with other hydraulic system components.

5. Compliance with Standards:

- Manufacturers adhere to industry standards and regulations to ensure the quality and compatibility of hydraulic cylinders. They follow standards such as ISO 9001 for quality management systems and ISO 6020/2 or ISO 6022 for hydraulic cylinders. Compliance with these standards ensures that the manufacturing processes, quality control measures, and product performance meet internationally recognized benchmarks.

6. Certification and Accreditation:

- Manufacturers may obtain certifications and accreditations from recognized organizations to demonstrate their commitment to quality and compatibility. Certifications such as ISO certifications or third-party certifications provide assurance to customers that the hydraulic cylinders have undergone rigorous evaluations and meet specific quality and compatibility standards.

7. Customer Collaboration:

- Manufacturers actively engage with customers to understand their specific requirements and ensure compatibility. They work closely with customers to gather application-specific details, such as operating conditions, load requirements, and environmental factors. This collaborative approach allows manufacturers to customize hydraulic cylinders and provide solutions that are perfectly matched to the customer's needs, ensuring compatibility and optimal performance.

8. Continuous Improvement:

- Manufacturers are committed to continuous improvement in their processes and products. They invest in research and development to incorporate the latest technologies, materials, and manufacturing techniques. By staying updated with industry advancements, manufacturers can enhance the quality, performance, and compatibility of their hydraulic cylinders over time.

By implementing effective design and engineering practices, selecting high-quality materials, conducting rigorous quality control, testing and validation procedures, complying with industry standards, obtaining certifications, collaborating with customers, and embracing continuous improvement, manufacturers ensure the quality and compatibility of hydraulic cylinders. These measures help to deliver reliable, high-performance cylinders that meet the diverse needs of industries and applications.
China manufacturer Hydraulic Actuator -Hydraulic Telescopic Cylinder for Truck   with Best Sales China manufacturer Hydraulic Actuator -Hydraulic Telescopic Cylinder for Truck   with Best Sales
editor by CX 2023-11-15